4 Lan Port EOC and 2 RF Port Slave with WiFi Function Slave Router

4 Lan Port EOC and 2 RF Port Slave with WiFi Function Slave Router

EOC Slave OP4001W Product Overview OP4001W is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the...

Product Details

EOC Slave OP4001W


1.jpg


Product Overview

OP4001W is the EOC slave based on HomePlug AV solution for Ethernet access over coax.  It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.

OP4001W is the slave with 4 Ethernet ports and WIFI.

OP4001W is based the Qualcomm chipset solution,with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The PHY Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs.


Function Features

Based on HomePlug AV solution and Qualcomm chipset

7.5-65Mhz frequency for EOC signals., no influence on CATV Servicen

PHY Layer speed 600Mbps n

Support data encryptionn

4 100M auto-negotiation Ethernet portn

Support the isolation of slave under one mastern

Support Port-based VLAN and 802.1q VLANn

Support bandwidth limitedn

Support QOS configuration based on slave port or VLAN.n

Support broadcast storm control.n

Support data packages countn

Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on.n

Support WEB,CLI and SNMP managementn

Support on-line upgradingn


Specification


Item

Parameters

OP4001W

Interface & indicator

RF interface

1*TV(RF signal) OUTPUT, metric F connector

1*CABLE(MIX)INPUT, metric F connector

Ethernet interface

4*10/100M auto-negotiation, RJ45

Power interface

1*DC12V power supply interface

LED indicators

1 x power indicator

1 x system indicator

1 x CABLE indicator

1 x WIFI indicator

LAN indicator(each Ethernet port has 1 indicator)

Performance  parameters

RF parameters

Frequency:7.5-65MHz

Output level:110±5dBuv

Receive sensibility:45dBuv

Return loss:>15dB

Output impedance:75Ω

Transmission

PHY Layer:600Mbps

Throughput on MAC Layer:320Mbps

Modulation Mode

OFDM– 2690-carriers

4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO

Working Mode

TDMA/CSMA

Encryption Mode

AES-128

Standard

EOC Standard

IEEE P1901(Draft)

HomePlug AV

Ethernet Standard

IEEE 802.3, IEEE 802.3x, IEEE 802.3u

IEEE802.1P, IEEE802.1Q

Software

Network Management

WEB, CLI, SNMP

Software Features

VLAN, QOS, Bandwidth Control, Broadcast storm limitation

Physical Features

Power supply & Consumption

Power adapter:12VDC1A

Power consumption:<8W

Dimension

160×120×32mm

Weight

0.5kg

Environment Attribute

Work temperature:0~50℃

Stock temperature:-40~85℃

Work humidity:10%~90%, non-condensation

Stock humidity:10%~90%, non-condensation

Inquiry