Low Price EOC User Terminal Device 4FE Ports Indoor EOC Slave with Router

Low Price EOC User Terminal Device 4FE Ports Indoor EOC Slave with Router

EOC Slave OP4001 Product Overview OP4001 is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the...

Product Details

EOC Slave OP4001


1.jpg


Product Overview

OP4001 is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.

CD5202L is slave with 2 Ethernet ports while OP4001 is the one with 4 Ethernet ports.

CD5202L/OP4001 is based the Qualcomm chipset solution,with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The PHY Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs


Function Features

Based on HomePlug AV solution and Qualcomm chipset

7.5-65Mhz frequency for EOC signals., no influence on CATV Servicen

PHY Layer speed 600Mbps n

Support data encryptionn

2 or 4 100M auto-negotiation Ethernet portn

Support the isolation of slave under one mastern

Support Port-based VLAN and 802.1q VLANn

Support bandwidth limitedn

Support QOS configuration based on slave port or VLAN.n

Support broadcast storm control.n

Support data packages countn

Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on.n

Support WEB,CLI and SNMP managementn

Support on-line upgradingn


Specification


Item

Parameters

CD5204

Interface & indicator

RF interface

1*TV(RF signal) OUTPUT, metric F connector

1*CABLE(MIX)INPUT, metric F connector

Ethernet interface

4*10/100M auto-negotiation, RJ45 (CD5X04 Series)

Power interface

1*DC12V power supply interface

LED indicators

1 x power indicator

1 x system indicator

1 x CABLE indicator

LAN indicator(each Ethernet port has 1 indicator)

Performance parameters

RF parameters

Frequency:7.5-65MHz

Output level:110±5dBuv

Receive sensibility: 45dBuv

Return loss: >15dB

Output impedance: 75Ω

Transmission

PHY Layer:600Mbps

Throughput on MAC Layer:320Mbps

Modulation Mode

OFDM

Inquiry