Fiber Optic ADSS OPGW Fiber Optic Cable Joint Box Splice Closure

Fiber Optic ADSS OPGW Fiber Optic Cable Joint Box Splice Closure

GJS-D1001-24C Dome Fiber Optic Splice Closure Product Description The GJS-D1001 Dome Fiber Optic Splice Closure are closures which accommodate the joint part of the cable, that can be used in manhole, in handhole, aerial-hanger, wall-mounting or be directly buried...

Product Details

1.1.jpg

GJS-D1001-24C


Dome Fiber Optic Splice Closure


Product Description

The GJS-D1001 Dome Fiber Optic Splice Closure are closures which accommodate the joint part of the cable, that can be used in manhole, in handhole, aerial-hanger, wall-mounting or be directly buried. Each splice case has three Cable Entry Ports.

The box is made from the high-quality PC and with the mechanical Sealing Structure filled with Silicon Gum Material. It can be opened after sealing and can be reused

Application:Aerial-hanger, Wall-mounting, Direct Buried


Specification

Item

GJS-D1001

Dimension ( mm )

Φ85 × 330

Weight ( Kg )

1.5

Round Port ( mm )

Ф7-Ф19

Cable Entry Ports

2 & 2

Max Capacity of Cores Per Splice Tray

6 ( Single ) / 12 ( Single )

Max Capacity of Splice Trays/ Closure

2

Max Capacity

12 ( Single ) / 24 ( Single )

Sealing Structure of Cable Entry Port

Heat-shrinkable Sealing Structure

Sealing Structure of Box

Silicon Gum Material


Accessories

Icon

Details

Icon

Details

2.jpg

Name: Splice Protective Tube

3.jpg

Name: Hanging Hook

Type: FPS-01

Type:Aerial-hanging or Wall-mounting

Qty:According to the fiber cores

Qty: 1 Set

4.jpg

Name: Cables Ties

5.jpg

Name: Heat-shrinkable Tube

Type: 3×100(mm)

Type: Φ50×150(mm)

Qty: 4×Splice Tray

Qty: 1 PCS

6.jpg

Name: Heat-shrinkable Tube

7.jpg

Name: Branch Block

Type: Φ28×150(mm)

Type:

Qty: 2 PCS

Qty: 1 PCS

8.jpg

Name: Marking Note

9.jpg

Name: Hose Clamp

Type: Non-dry Glue

Type: Φ8-Φ16(mm)

Qty: 4×Fiber Core

Qty: 4 PCS


Tools Required


Icon

Details

Icon

Details

10.jpg

Name: Blast Burner or Welding Gun

11.jpg

Name: Saw

Type:

Type:

Qty: 1 PCS

Qty: 1 PCS

12.jpg

Name: Pliers

13.jpg

Name: Pliers

Type:

Type:

Qty: 1 PCS

Qty: 1 PCS

14.jpg

Name: Minus Screwdriver

15.jpg

Name: Cross-shaped Screwdriver

Type:

Type:

Qty: 1 PCS

Qty: 1 PCS

16.jpg

Name: Scrubber


Type:

Qty: 1 PCS



Installation Steps

17.jpg18.jpg
(0)Check product, Accessories and tools(1)Saw the entry ports as need.
19.jpg20.jpg
(2)Strip the cable as the requirement of installation, and put the heat-shrinkable tube on.(3)Penetrate the stripped cable to the bracket through the entry ports.
21.jpg22.jpg
(4)Bend the strengthen wire by pliers to fix it on the bracket.(5)Fix the strengthen wire of the cable on the bracket by the cross-shaped screw driver.
23.jpg24.jpg
(6) Fix the cable on the bracket by using the minus screwdriver to fast the clamp.(7) Fix the fibers on the entry part of the splice tray by cables ties.
25.jpg26.jpg
(8) Put the optic fiber on the splice tray after splicing and make noting.(9) Put the dust cap of the splice tray on.
27.jpg28.jpg
(10)Sealing of the cable and the base: clean the entry ports and cable with 10cm long by scrubber.(11) Sand the cable and entry ports that need to heat-shrink by abrasive paper. Wipe the dust that be left after sanding away.
29.jpg30.jpg
(12) Bound and even the heat-shrink part with aluminum paper to avoid burn caused by high temperature of blast burner.(13) Put the heat-shrinkable tube on the entry ports, then, heating by blast burner and stop heating after it is tighten. Let it be cool naturally.
31.jpg32.jpg
(14) Usage of branch folk: when heating the oval entry port, folking the heat-shrinkable tube to separate the two cables and heating it follow the steps above.(15) Sealing: use clean scrubber to clean the base, the part to put silicone rubber ring and silicone rubber ring, then, put the silicone rubber ring on.
33.jpg34.jpg
(16) Put the barrel on the base.(17) Put on the clamp, run the ferris wheel to fix the base and barrel.

i.Aerial-hanging

35.jpg

ii.Wall-mounting

36.jpg

(18) When installing, fix the hanging hook as showing. Fix the closure with steel belt by minus screwdriver, and, fix another steel belt on the aerial-hanging pillar.


Transportation and Storage

(1) The package of this product adapts to any transportation ways. Avoid collision, drop, direct shower of rain & snow and insolation.

(2) Keep the product in a draughty and dry store, without corrosive gas in.

(3) Storage Temperature Range: -40℃ ~ +60℃


Inquiry