Address: Liansheng Road #10,Yuhang District, Hangzhou City, Zhejiang Province
Tension Clamp For Hanging Cable
High Quality Preformed Dead-end Tension Clamp For ADSS Fiber Hanging Cable Tension Clamp Description Tension Clamp Application connect cable and pole or tower for ADSS cable line protect cable and help cable to reduce vibration not produce the stress concentration which damage ADSS cable and...
connect cable and pole or tower for ADSS cable line
protect cable and help cable to reduce vibration
not produce the stress concentration which damage ADSS cable and keep cable normal use
Tension Clamp Structure&Materials
Hot galvanized steel shackles play a role in connection with the tower fasteners. Failure load: U-7 to 70kN, U-10 to 100kN, U-12 to 120kN.
Preformed tension rods
Be made of galvanized steel wire or aluminum clad steel and preformed into the process when prefabricated beam, inner wall layer of emery stick, and enhance the friction between clamp and cable.
Galvanized steel precision, the heart-shaped tension ring and shackle connected to avoid strain clamp too close to the exit of cable from the pole, keep the cable bend radius large enough.
Heart-shaped tension ring
Galvanized steel precision, clip embedded in the U-bend Clamp head, the protection Clamp connection with the extension rod. Failure load is 40kN, 70kN, 100kN and 120kN, etc.
Preformed armour rods
Galvanized steel or aluminum clad steel wire, preformed armour rods wall sticky particulate silicon carbide to increase friction and reduce the pressure on the cable side. preformed rods when the pre-processing into several sub-beams, to avoid installation errors and to facilitate rapid installation. Preformed wire toward the end of different specifications according to the radial lateral bending, to avoid vibration in the breeze under the cable clamp at the end of the friction and prevent damage to cable extrusion.
Hot Tags: tension clamp for hanging cable, made in China, manufacturers, suppliers, factory, buy discount